REPAIR EQUIPMENT FAQ's
RAS 123
How does the RAS 123 differ from the competition?
The GLASS MEDIC® RAS 123 lets operators with different skill levels produce consistent, quality results. In most windshield repair processes, vacuum and pressure are used to fill the break. The RAS system controls both cycles for you and eliminates the guesswork. Resin handling is virtually eliminated, and there's virtually no mess or risk from chemicals.
How does it work?
The RAS 123 system is designed to control many of the variables in the repair process. The vacuum is used to remove the air from the break. This is done with the resin held in the capsule, so no resin or liquid is over the damage. Once the air has been removed from the break, the pressure or filling cycle is accomplished in the most efficient manner. There is little need for manipulation of the break to remove entrapped air.
What kinds/size of damage will it repair?
The RAS 123 system will repair all types of star, bull's eye and combination breaks. The system can handle damage up to 5cm and pit diameters up to 1.5cm.
Does the system require electric power?
Yes, the RAS 123 uses an electric multi-voltage vacuum pump - 12v or 110v
What's included with the kit?
The system includes everything you need for great repairs
- Case/pump
- Switching Power supply
- 12 volt lead
- Vacuum Hose
- RAS 123 Assembly
- Mirror
- Cleaning Brush
- Carbide Probe
- Pit Polish
- Cleaning bottle
- Razor Blades
- Mylar Pads
- UV Lamp
- Pit Resin
- 30 RAS resin capsules
How easy is it to learn?
Very. The vacuum and pressure features are controlled by the system. All you do is follow 3 simple steps (1,2,3) you can do great repairs every time.
FLYING BRIDGE
Does the bridge work on curved windshields?
Yes, the bridge has two height adjustment screws on the back to assist with the curvature of the windshield.
How close to the edge of the windshield can you repair damage?
The bridge will repair damage right to the edge of the windshield.
What size of damage will the Flying Bridge repair?
The FB can be used to repair most stone chips and cracks. Even long cracks of six inches or more can easily be repaired.
Will the break run during the repair process?
NO, The suction cup on the Flying Bridge does not create additional stress to the damage site.
Does the Flying Bridge require electric power?
No, the piston creates the pressure and vacuum mechanically, using the custom designed seal.
GLASS ETCH EQUIPMENT
How portable is the machine?
The Glass Etch - PC can be taken anywhere. The systems weighs less then 15lbs and needs only 12 volt power.
How easy is it to use?
The system is very user friendly. You just type the VIN # into the Glass Etch -PC via the keyboard and the system does the rest.
Does the Glass Etch-PC check the VIN #?
Yes, The system has a program to verify the VIN sequence.
Can the VIN # be wiped or rubbed off once etched in the glass?
The VIN # is chemically etched into the glass. The only way to remove the etch, would be to grind the glass with a polisher.
How many kinds of resin do you offer?
We have 3 kinds of resin. Each one is designed to give you the best possible results in a specific application:
Repair Resin for filling the break
Pit Resin for capping the break
Crack Resin for filling cracks that go to the edge of the windshield
What are the viscosities of your resins?
Repair Resin 20 cps
Pit Resin 1600 cps
Crack Resin 600 cps
Do your resins yellow?
No. The reason is simple: our resins are designed and formulated to deliver superior U.V. Resistence.
What size bottles do you offer?
GLASS MEDIC® has two resin packages
5ml without eyedropper
15ml bottle /pack
What is the price of your resin?
5 pack $50.00
15 ml bottles $45.00
What testing have you done with your resin?
All resins have been tested by independent labs for tensile/shear strength, shrinkage, refractive index and weathering characteristics
Does your resin contain acrylic acid?
GLASS MEDIC® does not add acrylic acid to any of its formulations. However, small amounts of acrylic acid are present as a by-product of component synthesis. Acrylic acid content is less than 1% by weight.
Is your resin U.V curing?
All GLASS MEDIC® resins are U.V curing